Global DeIcers Market By Product Overview
De-icers Market was valued at USD 1.4 Billion in 2024 and is projected to grow at a CAGR of 6.50% to reach USD 2.5 Billion by 2034.
De-icers are used to spray deicing fluid, which may be used to remove accumulated snow or ice from an aircraft, onto the fuselage, landing gear, and stabilizers of the aircraft. The process of deicing involves clearing a surface of snow, ice, or frost. Applying chemicals to a surface that not only de-ices it but also stays there for a while, preventing ice from adhering to the surface and facilitating mechanical removal, is known as anti-icing. Deicing can be done by using liquid or dry chemicals (alcohols, glycols, various salts or brines, etc.) that decrease the freezing point of water, by applying heat, by using mechanical means (scraping, pushing), or by combining these approaches.
The rate of growth in accidents and related issues caused by snow accumulation on airplanes is the reason why the deicers market is more in demand globally in cold climate zones. The market demand for de-icers is surely being driven by the ongoing variance in climate conditions and the rising amount of snowfall in cold nations. One major reason driving demand for the de-icers industry is the gradual increase in population and tourism in colder regions. Furthermore, the market is also growing in size, with the aviation sector leading the way in terms of worldwide demand.
The adverse effects of using de-icers, such as rusting and surface degradation, as well as the growing demand for environmentally friendly products, will limit the global deicers market. Additionally, the high oxygen consumption of ethylene and propylene glycol may cause them to degrade, endangering the lives of aquatic life. Additional issues impeding the market's growth include the high cost of equipment and the scarcity of qualified personnel.
Global DeIcers Market By Product Drivers & Restraints
De-icers Market Drivers:
Increased usage in the Aircraft industry
- Airports must be equipped with the newest technologies to handle the growing volume of air travel without experiencing any disruptions or cancellations owing to inclement weather. As a result, several airports installed new amenities and technology, which are anticipated to boost de-icing operations globally. De-icing is necessary to enable the safe operation of airplanes in areas with cold temperatures and frequent snowfall.
- Air traffic climbed by 36.9% in 2023 compared to 2022, according to statistics supplied by the International Air Transport Association (IATA). Global traffic over the whole year 2023 was 94.1% of pre-pandemic (2019) levels. The expansion of the aviation sector and the rise in flight numbers are contributing to the growth in product market demand.
Robust safety regulations
- The safety rules about ice and snow contamination on airplanes have been enforced by aviation authorities globally with fewer exceptions. For example, because even minute amounts of frost, snow, or ice build-up adversely affect aerodynamics and lift, the Federal Aviation Administration (FAA) strongly prohibits airplanes from taking off in such conditions.
- De-icing equipment services are an essential and non-negotiable feature of airline operations, especially in cold locations due to these strict safety requirements. Dangers of noncompliance include harsh fines, delayed flights, or even deadly mishaps. As a result, airports and airlines are making significant investments in infrastructure, fluids, and efficient de-icing equipment, which is driving market expansion.
De-icers Market Restrains:
Lack of skilled personnel and equipment
- Equipment specific to the task, de-icing agents, and skilled labor are needed for the de-icing procedure. Significant expenditures may arise from acquiring and preserving the required de-icing tools, buying the de-icing solutions, and onboarding personnel.
- When faced with budgetary limits or during economic downturns, airlines and airports may find it challenging to manage these charges. These technologies may not be widely adopted because of the high operational expenses involved in de-icing, which would significantly impede the de-icing market's growth.
Global DeIcers Market By Product Segmentations & Regional Insights
De-icers Market is segmented based on Product Type, Fluid Type, End-User, and region:
Product Type Insights:
- Sweepers:
Sweepers are big machines with revolving bristles or brushes that sweep loose snow and ice off runways and taxiways before the application of de-icing fluid. By maintaining a clean surface for improved adhesion and lowering the volume of fluid required, sweepers contribute to the increased efficacy of de-icing solutions.
- De-Icing Trucks:
De-icing trucks are outfitted with high-pressure pumps and spray nozzles that allow them to accurately administer de-icing fluids to the landing gear, control surfaces, and wings of aircraft to melt snow and ice buildup. Features like boom articulation and computer-controlled spraying patterns are frequently seen on modern de-icing trucks, which enable effective and secure de-icing operations.
- De-icing Chemicals and Fluids:
Chemical de-icers work by producing a solution, or the process of dissolving, which melts snow and ice or lowers the freezing point of the combined de-icer and water. Brine is any chemical salt that has been dissolved in water and is the resulting mixture. Chemical salt de-icers don't work until they react with the water on the road to produce a solution.
Among the segments mentioned above the one that dominated the market is the De-icing Chemicals and Fluids segment as they are the core materials used for de-icing. Different varieties of de-icing fluids (Type I, II, III, and IV) are available to accommodate varying temperature ranges and holding durations. This type increases demand by ensuring that airports have the appropriate fluids for certain weather situations.
Fluid Type Insights:
- Type I:
Aircraft surfaces can be safely cleared of ice and frost with the use of Type I fluids, which are usually a heated blend of propylene glycol and water. Additionally, type I fluids' quick rate of dilution in the presence of precipitation contributes to their continued efficacy.
- Type II:
Type II de-icing fluid is designed for modest accumulations of ice and snow across a wide temperature range, usually from -20°C to -30°C. Its adaptability makes it appropriate for a broad range of winter weather conditions found at several airports worldwide.
- Type III:
Type III de-icing fluids are intended for use in harsh winter circumstances. They are made to dissolve thick layers of ice and snow at very low temperatures, usually between -30°C and -40°C. In comparison to Type I and II fluids, these fluids frequently include a larger concentration of glycol (such as propylene or ethylene glycol), which enables them to function at lower temperatures.
- Type IV:
Type IV de-icing fluids are used for extremely low temperatures (below -40°C) in very uncommon conditions. Type IV de-icing fluids make up a very tiny portion of the market overall since they are necessary only in certain geographic locations and during very few weather conditions.
Among the segments mentioned above the one that dominated the market is the Type II fluid segment due to its fast-acting qualities, which enable rapid de-icing and turnaround times. This is especially important at crowded airports where timely aircraft de-icing is necessary to keep flights on schedule.
End-User Insights:
- Commercial Aircraft:
The great majority of de-icing operations are related to commercial aviation, which includes both passenger and freight carriers. Even little delays brought on by winter weather can have a big impact on the network as a whole to sustain this high amount of air travel. During the winter months, de-icing activities at airports become crucial to guaranteeing safe and timely departures.
- Military Aircraft:
De-icing is also necessary for military aircraft, however, it is not as often as it is for commercial use. De-icing techniques may still be necessary as a result of military exercises and deployments, especially in areas with cold temperatures.
Among the segments mentioned above the one that dominated the market is Commercial Aircrafts because aviation regulatory bodies, such as the Federal Aviation Administration (FAA), have implemented very particular de-icing protocols to ensure the safety of crew and passengers.
Regional Insights:
De-icers Market Regional Insights
- North America market is estimated to witness a significantly high revenue share over the forecast period, because of the extensively harsh winter conditions, well-established aviation industries, and robust aircraft infrastructure.
- Asia Pacific market is estimated to witness the largest revenue share because of the rising air traffic, and tourism in the region. The growing airport infrastructure in the region is also paving the way for the growth of the market.
- Europe market finds lucrative market opportunities because of the increasing advances in the aircraft infrastructure, rising tourism avenues and cold weather conditions during winters.
- Latin America market is increasing gradually as a result of the expanding air travel and the rising awareness of the significance of de-icers for aircraft.
- Middle East & Africa market is an emerging market as a result of the rise in tourism activities, growing aviation sectors, and the presence of some colder countries in the region is driving the market.
De-icers Market Report Scope:
Attribute |
Details |
Market Size 2024 |
US$ 1.4 billion |
Projected Market Size 2034 |
US$ 2.5 billion |
CAGR Growth Rate |
6.50% |
Base year for estimation |
2023 |
Forecast period |
2024 – 2034 |
Market representation |
Revenue in USD Billion & CAGR from 2024 to 2034 |
Market Segmentation |
By Product Type - Sweepers, De-Icing Trucks, De-icing Chemicals & Fluids. By Fluid Type - Type I, Type II, Type III, and Type IV. By End-user - Commercial Aircrafts and Military Aircrafts. |
Regional scope |
North America - U.S., Canada Europe - UK, Germany, Spain, France, Italy, Russia, Rest of Europe Asia Pacific - Japan, India, China, South Korea, Australia, Rest of Asia-Pacific Latin America - Brazil, Mexico, Argentina, Rest of Latin America Middle East & Africa - South Africa, Saudi Arabia, UAE, Rest of Middle East & Africa |
Report coverage |
Revenue forecast, company share, competitive landscape, growth factors, and trends |
Segments Covered in the Report:
This report forecasts revenue growth at global, regional, and country levels and provides an analysis of the latest industry trends and opportunities in each of the sub-segments from 2024 to 2034. For the purpose of this study segmented the De-icers Market report based on Product Type, Fluid Type, End User, and region:
De-icers Market, By Product Type:
- Sweepers
- De-Icing Trucks
- De-icing Chemicals and Fluids
De-icers Market, By Fluid Type:
- Type I
- Type II
- Type III
- Type IV
De-icers Market, By End-User:
- Commercial Aircrafts
- Military Aircraft
De-icers Market, By Region:
- North America
- U.S.
- Canada
- Europe
- Germany
- UK
- France
- Russia
- Italy
- Rest of Europe
- Asia Pacific
- China
- India
- Japan
- South Korea
- Rest of Asia Pacific
- Latin America
- Brazil
- Mexico
- Rest of Latin America
- Middle East & Africa
- GCC
- Israel
- South Africa
- Rest of Middle East & Africa
Global DeIcers Market By Product Competitive Landscape & Key Players
The key players operating the De-icers Market includes BASF Corporation, Global Ground Support LLC, UTC Aerospace Systems, The Dow Chemical Company, Vestergaard Company A/S, Weihai Guangtai Airport Equipment Co., B/E Aerospace, Inc., Clariant AG, Kilfrost Corporation, and Honeywell International, Inc.
Global DeIcers Market By Product Recent News
- In September 2022, Vestergaard Company launched the first electric deicer at GSE Expo Europe in 2022. The fluid is heated electrically and the e-Mini MY Lite is mounted on a Vestergaard electrical chassis. The 40 or 62 kwh battery that powers the e-Mini MY Lite can withstand 8 to 12 deicings, depending on the amount of pollution and fluid required. It can also travel 40 to 75 kilometers between charges.
Global DeIcers Market By Product Company Profile
- BASF Corporation*
- Global Ground Support LLC
- UTC Aerospace Systems
- The Dow Chemical Company
- Vestergaard Company A/S
- Weihai Guangtai Airport Equipment Co.
- B/E Aerospace, Inc.
- Clariant AG
- Kilfrost Corporation
- Honeywell International, Inc.
FAQs
De-Icers Market is segmented into By Type, By Application and Region.
The primary factors driving the de-icers market include increasing demand for efficient snow and ice removal solutions in regions with cold climates, as well as the growth of transportation and aviation industries, which require effective de-icing agents to ensure safety and operational efficiency.
Key restraints in the global de-icers market for recruitment marketing include environmental concerns related to the use of certain de-icing chemicals, prompting the industry to explore more eco-friendly alternatives.
The report typically considers regions with cold climates, such as North America, Europe, and Asia-Pacific. North America is expected to dominate the de-icers market due to its extensive use of de-icing agents in winter maintenance practices.
BASF Corporation Global Ground Support LLC UTC Aerospace Systems The Dow Chemical Company Vestergaard Company A/S Weihai Guangtai Airport Equipment Co. B/E Aerospace, Inc. Clariant AG Kilfrost Corporation Honeywell International, Inc.